Integra Eps Configuration - Ultraflex INTEGRA UC120 Serie Manuel D'installation Et D'entretien

ULTRAFLEX
1.3.1 INTEGRA EPS configurations
INTEGRA EPS version involeves the use of an electronic UC120E cylinder combined, in the case of several engines,
with a UC120P-OBF hydraulic cylinder and dedicated coupling bars depending on the configuration.
The possible configurations are:
SINGLE
ENGINE
DUAL
ENGINE
TRIPLE
ENGINE
Engines with propellers up to a max. power of 400 hp per engine or up to a max. speed 75 mph
QUADRUPLE
ENGINE
Engines with propellers up to a max. power of 400 hp per engine or up to a max. speed 75 mph
page 8
of 71 -
HYDRAULIC CYLINDERS FOR OUTBOARD ENGINES
ENGINE NUMBER
With 1 cylinder UC120E
Engine up to a max. power of 400 hp or up to max. 70 mph
With 1 cylinder UC120E and 1 bar A96-120
Engines with non counter-rotating propellers up to a max.
power of 200 hp per engine or up to a max. speed of 70 mph
Engines with counter-rotating propellers up to a max.
power of 350 hp per engine or up to a max. speed of 70 mph
1 cylinder UC120P-OBF and 1 bar A95-120
Engines with non counter-rotating propellers up to a max.
power of 350 hp per engine or up to a max. speed of 70 mph
Engines with counter-rotating propellers up to a max.
power of 400 hp per engine or up to a max. speed of 75 mph
Installation and Maintenance Manual
With 1 cylinder UC120E,
With 1 cylinder UC120E,
1 cylinder UC120P-OBF
and 1 bar A97-120
With 1 cylinder
UC120P-OBF
and bar A98-120
UC120E,
1 cylinder