Sony SU-B551S Mode D'emploi page 7

Step 2:
Installing the TV
Before assembling
• Be sure to have a Phillips screwdriver that fits the screws prior to
the assembly.
• When using an electric screwdriver,
set the torque setting to approximately
1.5 N·m {15 kgf·cm}.
1
Position the Neck-Spacer on the
TV Stand.
The Neck-Spacer is used for adjusting the height of the
Neck and TV.
Be sure to attach the Neck-Spacer.
For KDL-55HX82x/46HX82x/55NX72x/46NX72x
only:
Neck-Spacer
12 cm ~
2
Attach the Neck and the Neck-
Spacer (for KDL-55HX82x/
46HX82x/55NX72x/46NX72x only)
to the TV Stand with the four
Neck Screws (PSW4 × 12)
(supplied).
Neck Screw
(PSW4 × 12)
Neck
3
When moving the TV, hold the TV
as shown below.
(Continued)
7
(GB)