Sony SU-B551S Mode D'emploi page 6

Note on taking the TV Stand out from the carton
Be sure to hold the TV Stand and handle it carefully.
Step 1:
Checking the parts
Name
Stand
*
Rear Cover L
*
Rear Cover R
Joint
Neck
Neck-Spacer**
TV Stand Neck Attachment Screw
(PSW5 × 16) (× 3)
Joint Screw
(PSW5 × 16) (× 3)
Neck Screw
(PSW4 × 12)
AC adapter (mains adapter) (ACDP-001)
AC power cord (mains lead)
High Speed HDMI cable
Instructions manual
* For SU-B551S model only.
** For SU-B551S/461S models only.
6
(GB)
WARNING
If you allow the AC power cord (mains lead) to be pinched under
or between pieces of equipment, this may result in a short circuit
or an electric shock. If you stumble over the AC power cord
(mains lead) or the connecting cable, the TV Stand may topple
over and cause injury.
Decide on the installation location and lay the TV
Stand down before installing the TV.
Since the TV is heavy, it is recommended that you decide on the
installation location beforehand, and assemble the TV Stand on
Quantity
site.
Refer to the operating instructions supplied with your TV for
information on how to remove the Table-Top Stand from the TV.
1
1
1
1
1
1
6
4
1
1
1