Hamilton Beach SodaStation 85203 Mode D'emploi page 4

How to Use
NOTE: Only use SodaStream
water bottles. Never carbonate if bottle is empty or not fully inserted.
1
Remove back cover. Remove
seal and twist off cap from CO
Carbonator*.
4
*Under License
4
840241502 ENv06.indd 4
CO Carbonator* and SodaStation
®
2
2
To install CO Carbonator*, insert
2
threaded part of Carbonator* into
2
unit receptacle and hand-tighten.
Replace back cover.
Remove water bottle by turning
clockwise to unlock. Fill water
bottle with VERY COLD water to
the MAX FILL Line.
WARNING! Explosion Hazard:
Dried flavor syrups can clog the
carbonation nozzle. Add flavors
after carbonation only.
w WARNING Food Safety Hazard.
• Always use only food/beverage-grade CO
• Never use any CO cylinder originally intended for nonfood uses
2
(e.g., paint ball).
TM
• Never use any adapter that permits use of nonfood/nonbeverage-
grade CO or nonfood/nonbeverage CO
2
OR
3
5
.
2
cylinder.
2
To install 60L CO Carbonator*,
2
place kitchen towel or soft cloth
on countertop to protect unit
from scratching.
Turn unit upside down and
place on top of towel. Insert
Carbonator* through opening on
bottom of unit. Insert threaded
part of Carbonator* into unit
receptacle and hand-tighten.
Replace back cover. Carefully,
turn unit right-side up.
Insert filled water bottle and turn
counterclockwise until it cannot
be turned.
5/27/14 11:05 AM