Alcatel OneTouch Pixi 3 Mode D'emploi page 36

5.2.1 To set an alarm
From the Time screen, touch
to add a new alarm. The following options will show:
• Time Touch numbers to set the time for your alarm.
• Label Touch to set a name for the alarm.
• Repeat Touch to select days you want alarm to work.
• Vibrate Select to activate vibration.
• Ringtone Touch to select a ringtone for the alarm.
When finished, touch OK to confirm.
Touch to delete the selected alarm.
5.2.2 To adjust alarm settings
Touch from Alarms screen. The following options will be available under
Settings:
• Alarm in silent
Touch to play alarm even when the phone is in
mode silent mode.
• Snooze duration Touch to set up the duration of snooze.
• Volume buttons Touch to set the alarm sounds: None,Snooze,
Dismiss.
• Turn over to
Touch to select the turn over behaviour:
activate Snooze or Stop.
to enter the Alarm screen, touch
69
6
Getting connected ................
To connect to the Internet with this phone, you can use GPRS/EDGE/3G
networks or Wi-Fi, whichever is most convenient.
6.1 Connecting to the Internet
6.1.1 GPRS/EDGE/3G
The first time you turn on your phone with a SIM card inserted, it will
automatically configure network service: GPRS, EDGE or 3G. If the
network is not connected, you can touch
To check the network connection you are using, touch Application tab
on the Home screen, then touch Settings\More...\Mobile networks\
Access Point Names or Network operators.
To create a new access point
A new GPRS/EDGE/3G network connection can be added to your phone
with the following steps:
• Drag down notification panel and touch
• Touch More...\Mobile networks\Access Point Names
• Touch and select New APN.
• Enter the required APN information.
and select Save.
• When finished, touch
on Quick setting bar.
to access Settings.
70