Alcatel OneTouch Pixi 3 Mode D'emploi page 11

Charging the battery
Connect battery charger to your phone and plug into the socket.
If the battery is very low, there will be no indication that power is
being received until the charge is sufficient to show the charging
status bar. To reduce power consumption and energy waste, once the
battery is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when not
in use; reduce the backlight time, etc.
1.2.2 Power on your phone
Hold down the Power key until the phone powers on, unlock your phone
(Slide, PIN, Password, Pattern, Face unlock or Voice unlock) if necessary and
confirm. The Home screen will then be displayed.
If you do not know your PIN code or if you have forgotten it, contact your
network operator. Do not leave your PIN code with your phone. Store this
information in a safe place when not in use.
19
Set up your phone for the first time
The first time you power on the phone, you should set the following
options:
• Touch Get started..., then select the phone's language.
• The device will search for service by itself. The process of activation will
take a few minutes
• Select your input keyboard, then touch Next.
• Select a SIM card or choose Always ask for voice call, messaging, etc.
• Set your date and time zone, you can also choose Automatic time zone,
then touch Next.
• Set up your Google account: Touch Set up now. If you have a Google
account, touch Sign in, then enter your username and password. If you
forgot your password, you can go to http://www.google.com/ to retrieve
it. Touch Next to skip to the next step.
• Touch Next, then the Setup complete screen will display, touch Finish
to confirm.
When the phone is powered on, you can connect to a Wi-Fi network,
without a SIM card inserted (refer to section "6.1.2 Wi-Fi"), to sign into
your Google account and to use some features.
1.2.3 Power off your phone
Hold down the Power key until the Phone options appear, select Power
off.
20