Ega Master 66549 Manuel D'instructions page 70

A
NOTE : Activated Job list docks on right side of each screen, click on the program to be
executed on the list (JOB-2-JOB2 with a blue background as shown above) and wait for about
five seconds JOB-Seq will display the selected program.
B
NOTE : If the JOB Name is blocked, you can adjust the horizontal bar on the left to
display the full name on the job list.
D
SD Load
Setting data can be stored in the SD card. Insert the SD card into the computer and use
the SD card loading function of this system to load the data into other controllers, if there are
multiple controllers in same setting.
- Load SD: Select the file extension of .kls in the SD card.
- SET: After confirming that the data is correct, click SET.
70