Ega Master 66549 Manuel D'instructions page 55

This manual describes how to quickly operate the "Data Acquisition System" and get started
with the controller.
Diverse and well rounded operation interface, simple and user-friendly design allows users
to get, quick understanding. Has the functions of report and table printing, data analysis, trend
graph, parameter setting, etc. It is very convenient for users.
- Windows 10, Windows 8, Windows 7, Windows XP or Windows Vista.
- Hardware memory at least 768MB/2GBHz processor.
- At least 2GB hard disk.
- Recommended at least 16-bit color and 1024x768 screen resolution.
- .NET Framework 4.0 or above must be installed.
1. The following must be prepared before operating this system:
- The controller.
- Executable file for the operating system
- One RS-232 serial port.
- One 1D (Linear) barcode scanner (*not necessary).
2. Device connection as in the following diagram:
USER GUIDE
SYSTEM REQUIREMENTS
HARDWARE
RS-232
66549
USB
PORT2
RS-232
Data_Acquisition_System.exe.
Barcode
scanner
PC
55