Ega Master 66549 Manuel D'instructions page 43

LCM DISPLAY FUNCTION INTRODUCTION
1
2
3
4
1. Display job
2. Display sequence
3. Program name
4. Display system status
5. Display job sequence
HOT KEY FUNCTION INTRODUCTION
3
1. Left button: Press 3 seconds to
return to the first job sequence
after beep sound.
2. Down button: Press 3 seconds
to return to the last job
sequence after beep sound.
6. Display repeat times
7. Display action time
8. Display number of turns
9. Display the target torque/display the tightening torque
SYSTEM SETTING METHOD INTRODUCTION
5 6
1 2 4
3. Up button: Press up and down button
and release to view tool setting.
4. Right button: Press for 3 seconds to
go to the next job sequence.
7
8
9
43