Ega Master 66549 Manuel D'instructions page 69

C Job Sequence (JS)
- Job: Job Nº.1 ~ Job Nº.50 could be selected.
- Job Sequence: Job Sequence Nº.1 ~ Job Sequence Nº.50 could be selected.
- Tightening Program (TP): Tightening Program (TP) Nº.1 ~ Tightening Program (TP) Nº.99
could be selected.
- Tightening Repeat (TR): Tightening Repeat (TR) Nº.1 ~ Tightening Repeat (TR) Nº.99 could
be selected.
- Direction: CW, CCW.
- Force: Setting value from 1 to 9, (9 maximum force).
- RPM: Set desired RPM. The limitation is based on screwdriver specifications.
- Job Name: Assign the name of job (1~10 characters can be input).
- Active: After naming the job and checking "
displayed on the right side of the real-time display data page, and you can choose to switch
to the specified task.
NOTE: After clicking the button, the Job Sequence (JS) will be saved to the controller.
Example: On the right side of the Instant data display page, a list of the selected jobs will be
displayed
Step 1: Set Job 1, Job Name: JOB01, Active
Step 2: Set Job 2, Job Name: JOB02, Active
Active" and click save, the checked job will be
SAVE
SAVE
69