Modine ECO CGC 251E4R Manuel Technique page 32

6.24 For installations at height, use elevating platforms, scaffolding or trestles.
6.25 If the unit is equipped with an electric defrosting device with resistors (connections cabled in a thermoplastic junction box),
define the number and frequency of the switch-ons of the resistors and periodically check their functionality.
6.26 In the case of more than one model installed at close range it is advisable to avoid alternate defrostings.
6.27 Upon request, models can be supplied with coils, defrosting units and fan motors different from the standard ones.
6.28 Discharge the pre-charge pressure (approx. 2 bar) from the heat exchanger before cutting the inlet and/or outlet sleeves.
Figure 5
32
www.modine.com