SilverCrest SBKG 40 A1 Mode D'emploi page 22

Troubleshooting
Fault causes and remedies
If you cannot connect the headphones to a Bluetooth
back device, proceed as follows:
♦ Make sure that the Bluetooth
device.
♦ Make sure that the audio cable
of the headphones. When an audio cable
Bluetooth
♦ Check that the headphones are switched on.
♦ If you use several Bluetooth
previous connection is disconnected. There may be a previously paired
playback device still within range.
♦ Make sure that the headphones are no more than 10 metres from the
playback device and that no obstacles or electronic devices are placed
between them.
NOTE
► In an environment with high-frequency interference, you may experi-
ence noise interference during music playback via Bluetooth
soon as the interference has ceased, music playback should automati-
cally continue in Bluetooth
SBKG 40 A1
function of the headphones is deactivated.
®
function is activated on the playback
®
w
is connected to the AUX IN socket
w
playback devices, ensure that any
®
mode without any further problems.
®
-compatible play-
®
is connected, the
GB │ IE │
0
. As
®
19 ■