Télécharger Imprimer la page

SilverCrest SBKG 40 A1 Mode D'emploi page 14

Casque audio bluetooth

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
Charging the internal battery
NOTE
Before using the headphones, the integrated battery must be com-
pletely charged.
CAUTION
Charge the headphones only in dry indoor spaces.
Use only the supplied USB charging cable
phones.
Disconnect the USB charging cable
Make sure that the headphones are switched off. To switch off the
headphones, press the
sounds and the LED 
Connect the USB-A plug on the USB charging cable
mains adapter or a USB port on your computer.
Connect the USB-C plug of the USB charging cable
USB-C charging port DC IN
NOTE
6
The LED
charged, the LED
Charging takes about 2.5 hours at a charging current of 500 mA.
When the battery is fully charged, you can play back music at a me-
dium volume (85 dB(A)) for up to 15 hours. The playback time may
vary depending on level of the volume.
When the battery is empty, the LED
seconds and a signal tone sounds. The headphones then switch off
automatically.
SBKG 40 A1
button
6
goes out.
lights up white during charging. When the battery is fully
6
switches off.
q
q
when charging is complete.
4
for about 2 seconds until a beep
7
on the headphones.
6
flashes white once every 10
to charge the head-
q
to a USB
q
to the
GB │ IE
 11

Publicité

loading

Ce manuel est également adapté pour:

374059 2104