d)
Store the unit in a dry, cool place, free from moisture and direct exposure to
sunlight.
e)
Do not spray the device with a water jet or submerge it in water.
f)
Do not allow water to get inside the device through vents in the housing of the
device.
g)
Clean the vents with a brush and compressed air.
h)
The device must be regularly inspected to check its technical efficiency and
spot any damage.
i)
Use a soft, damp cloth for cleaning.
j)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal
spatula) because they may damage the surface material of the appliance.
k) The water in the tank must be replaced regularly. After each day of use, the
containers should be cleaned to avoid the growth of bacteria.
l)
When the device is not in use, close the gas supply valve to avoid an accident.
m) If the device is not going to be used for an extended period of time, clean its
surface with a cloth and store in a well-ventilated place.
n) A gas tube that is cracked, frayed, matted or otherwise damaged must be
replaced immediately.
o) The gas tube must be replaced every two years.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems. Hand it over to an electric
and electrical device recycling and collection point. Check the symbol on the
product, instruction manual and packaging. The plastics used to construct the device
can be recycled in accordance with their markings. By choosing to recycle you are
making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
DRAWINGS
DEVICES: RC-BMG320H/ RC-BMG320E/ RC-BMG337/ RC-BMG330/ RC-BMG350