PNI HOUSE IPMAX POE 3 Manuel Utilisateur page 4

Dimensions
Working temperature -26°C ~ +80°C
Instructions for use
Installing the storage unit
Before first use, please install the storage unit. Only one SATA HDD with a
maximum capacity of 14TB can be installed inside the recording unit (HDD is
not included in the package).
• Loosen the screws and open the NVR housing
• Connect the data cables and secure the hard drive with the screws
• Close back the NVR housing
• Connect the power and internet cable to the NVR
Turn on the device
Plug the power cord into a 230V outlet. The NVR will start. The indicator LED
will light up.
If the start time is within the preset schedule for recording, then the recording
function will start automatically.
Notes:
1. Check that the input voltage corresponds to the recommended voltage of the
device. The supply voltage is 230V ± 10% / 50 Hz 2A.
2. We suggest using a UPS device to protect the device from voltage fluctuations.
Turn off the device
There are two ways to turn off the device.
1. Access the main menu (right click on the screen) and select the option
Logout - Shutdown
2. Turn off the power supply.
Special warnings:
1. Restart after power failure. If the device is closed abnormally, it creates a
User manual
70 x 190 x 65 mm
4