PNI HOUSE IPMAX POE 3 Manuel Utilisateur page 22

Other menu options
Right click on the screen to display
additional options:
Channel Set,
Playback, Face
parameters, Color settings, Split
menu, PTZ Control, Output adjust,
NetDetect, Logout.
Channel set
The interface allows adding and managing the cameras added to the system.
Add cameras interface
1. Select the communication protocol between the NVR and the cameras.
Options: NETIP, ONVIF, Full Netcom.
2. Search. Press the Search key to search for cameras connected to the same
router (same network) as the NVR.
3. Add. From the list of displayed cameras, select the desired cameras and
click Add to add them to the system.
4. Network. Configure network parameters for cameras (IP address,
gateway, etc.)
5. Quick set. Quick addition and configuration of cameras.
6. IP Bulk Modify. Quick change of IP to multiple cameras.
Channels interface
1. Delete. Delete the camera from the selected channel. Click Apply to run.
2. Clear. Delete the information on the selected channel. Click Apply to run.
3. Encode. Displays the technical parameters of the connected cameras
(resolution, frame rate, video compression, quality, etc.).
4. Edit devices. Change IP and port for the selected channel.
5. Bulk upgrade. Firmware update for selected cameras.
6. Network detect. Cloud network and server testing and diagnostics.
User manual
Record Mode,
detection, IPC
22