Publicité
Les langues disponibles
Les langues disponibles
Notes Before Cleaning
Tidy up the area to be cleaned by putting
furniture, such as chairs, in their proper
place.
During the first use, make sure each room door
is open to help DEEBOT fully explore your
house.
It may be necessary to place a physical
barrier at the edge of a drop to stop the unit
from falling over the edge.
Make sure areas to be cleaned are well
illuminated so Visual Detection works
properly. Remove power cords and small
objects from the floor to ensure cleaning
efficiency.
Put away objects including cables, cloths and slippers, etc. on
the floor to improve the cleaning efficiency.
Clean the AIVI Visual Detection Sensor and TrueMapping
Distance Sensor with a clean cloth, and avoid using any
detergent or cleaning spray.
Before using the product on a rug with tasseled edges, please
fold the rug edges under.
Please do not stand in narrow spaces, such as hallways, and
make sure not to block the Detection Sensor.
Quick Start
Before using DEEBOT, please remove all protective films or protective
strips on DEEBOT and Clean Station.
Install the Side Brush
Make sure the color of Side Brush is consistent with that of mounting slot.
ECOVACS HOME App
To enjoy all available features, it is recommended to control your DEEBOT via
the ECOVACS HOME app.
Before you start, make sure that:
• Your mobile phone is connected to a Wi-Fi network.
• The 2.4GHz or 2.4/5 GHz band wireless signal is enabled on your router.
• The Wi-Fi indicator light on DEEBOT is slowly flashing.
Wi-Fi Indicator Light
Slowly flashing
Rapidly flashing
Solid
Click
Disconnected to Wi-Fi or
waiting for Wi-Fi connection
Connecting to Wi-Fi
Connected to Wi-Fi
11
EN
Publicité
