Modine ECO GDE 311E3 Manuel Technique page 31

Ø350 fan diameter unit
Heater connection diagram
Important. Application of adequate thermal control systems on feeder lines is mandatory. Performance of all electric
heaters must be periodically controlled to avoid damage due to ice build-up. Modine is not liable in any way for defects
caused by non detected malfunctions. For models supplied with wiring in a junction box, remove the cover to make the
connection. It is compulsory to use power cables with a minimum cross-section according to the technical standards
in force in the country of installation, depending also on the laying method, the length of the cables and their type. To
minimise the risk of indirect contact, it is advisable to earth the unit, using the earth pole (where present). For further
information please refer to the diagrams supplied with the model.
Ø315 fan diameter unit
Connection 400V/3/50-60Hz STANDARD
= yellow-green
L = brown
N = blue or grey
SD = junction box
31
www.modine.com