Ghibli & Wirbel FR30 E45 TOUCH Utilisation Et Entretien page 34

PROBLEM
Pressing the switch (34), the
machine will not turn on.
The brush does not rotate.
Aspirator does not work.
The machine does not dry
well, leaving traces of water
on the floor.
TROUBLESHOOTING
CAUSE
Circuit switch to position "0".
Power cable disconnected.
Function card damaged.
The touch sensor on the
handle is defective.
Brush motor damaged.
Brush rotation
switch not pressed.
Function card damaged.
Intake motor damaged.
Suction unit switch
pressed.
Recovery tank full.
Aspirator off.
Aspiration tube blocked.
Dirty wiper.
Recovery tank full.
Dirty water filter clogged.
Squeegee rubber
worn.
ENGLISH - 12
Professional Cleaning Machines Since 1968
SOLUTION
Press the power switch.
Connect the cable.
Replace.
Replace.
Replace.
enabling Press the switch.
Replace.
Replace.
not Press the switch.
Empty, wash and clean the
tank and the probes.
Start up the aspirator.
Check and if necessary
clean the aspiration tube
that connects the squeegee
to the recovery tank.
Clean the wiper.
Empty the recovery tank.
Clean the filter.
blades Replace or turn over the
squeegee rubber blades.
www.ghibliwirbel.com