CASO DESIGN ProGourmet 2100 Mode D'emploi Original page 42

 With the + / - keys, you can change the settings at any time in a range from 60 –
240°C. (Temperature stages: 60, 70, 80, 90, 100, 120, 140, 160, 180, 200, 220 and
240°C).
 Please note that the two functions of level and temperature can be chosen as
alternative. You can either work with the power levels or with the temperature stages.
The most recently selected function is active.
 The temperature is measured by a sensor below the glass ceramic plate, therefore the
displayed temperature can deviate from the temperature in the pot.
Please note
► In case of grilling or cooking deep fry food we would advise you to use the function
"Temperature" as in this case you can use temperatures up to 240°C.
► When one hotplate works with 180-240°C then the other hotplate cannot work with
more than 160°C.
► When one hotplate works with 180-240°C then the other hotplate cannot work with
more than level 10.
14.4.5 Timer
 Timer Function. Press the button Timer 2. With the +/- keys, you can now select the
operating time in 1-minute intervals (up to max. 180 minutes).
 Once the time is up, an acoustic signal sounds and the device automatically goes into
standby mode.
Please note
► During timer operation, you can change the duration at any time with the +/- keys. With
the memory function of the device, the power stage or temperature settings remain
unchanged here.
14.4.6 Direct functions
Switch on the device with On/Standby and choose with button fucntion the desired direct
function. The corresponding lamp will light up.
Preset Direct functions
Direct function
Heat I
Heat II
Boil
Fry
With button 2 timer you can select the operating time with the +/- keys.
caso ProGourmet 2100 / ProGourmet 3500
Setting
Level 1
Level 2
Level 8
Level 10
42