CASO DESIGN ProGourmet 2100 Mode D'emploi Original page 38

13.1 Operating elements and displays
13.1.1 Operating panel and Display
1 On/Standby button
2 Function key timer
3 Function key temperature
4 Function key level
5 Button function – selection of directfunction
6 Selection button (+), increase of the power level, temperature or duration
7 Selection button (-), reduction of the power level, temperature or duration
8 LED display
9 Directfunction Heat I – Level 1
11 Directfuntion Boil – Level 8
13.1.2 Details on the device
This instruction and when "H" is displayed, is to warn that the ceramic hob may
still be hot. Although the induction cooker itself does not generate any heat
during the cooking process, the temperature of the cooking utensil does heat the hob!
Adhere to the following safety instructions in order to avoid being burnt by the hot
appliance:
ATTENTION
Risk of burning due to hot surface!
► Do not touch the surface of the ceramic hob while it is still hot ("H" is displayed)
► Do not place any objects on the hot ceramic hob.
13.1.3 Signal Tones
The appliance emits an acoustic signal after being switched on and in the event of a fault.
Please note
► The acoustic signal continues to sound until the fault has been rectified or the
appliance has been switched off.
You will find more detailed information on error messages in the chapter entitled
„Fault indications".
caso ProGourmet 2100 / ProGourmet 3500
10 Directfunction Heat II – Level 2
12 Directfunction Fry – Level 10
38