Husqvarna K 1270R Manuel D'utilisation page 19

Declaration of conformity of partly completed machinery
(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the partly
completed power cutter Husqvarna K 1270R from 2016's serial numbers and onwards (the year is clearly stated in plain
text on the rating plate with subsequent serial number), complies with the requirements of the COUNCIL'S DIRECTIVES:
• of May 17, 2006 "relating to machinery" 2006/42/EC.
• of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
• of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
The following standards have been applied: EN ISO 12100:2010, EN ISO 14982:2009, CISPR12:2007+AMD1:2009,
EN55012:2008+A1:2009, EN ISO 19432:2012
Husqvarna AB undertakes to transmit, in response to a reasoned request by the national authorities, relevant information
on this partly completed machinery.
Husqvarna AB states that this partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of directive 2006/42/EC.
Gothenburg, 25 April 2016
Joakim Ed
Global R & D Director
Construction Equipment Husqvarna AB
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
TECHNICAL DATA
English – 19