NSK Ti-Max X35L Mode D'emploi page 10

CAUTION
• Be sure to hold the handpiece firmly to prevent the handpiece from slipping out by the spray pressure when lubricating.
• Supply lubricant until it comes out of the handpiece head (for approx. 2 seconds).
• Keep the PANA SPRAY Plus can upright.
Care3 Plus
NSK Care3 Plus automatic handpiece cleaning and lubrication system
After connecting the handpiece to the correct adaptor, activate the Care3 System per the Care3 System instructions.
7. Sterilization
This product can be washed via Thermo·Disinfector.
NSK recommends autoclaving.
Sterilization is required first time you use and after each patient as noted below.
9