NSK Ti-Max X35L Mode D'emploi page 7

3. Insertion and Removal of the Eva Tip or Profin Tip (X55L,X55)
(1) Tip Insertion
A) Eva Tip
Insert an Eva Tip into the head.
B) Profin Tip
Insert a Profin Tip into the head. After adjusting the direction of the tip to the desired angle, push it
firmly into the slit at the plunger of the head. (Fig.5)
(2) Removal of Tip
Insert a TIP REMOVER in the hole of the handpiece back head and begin to thrust a tip. (Fig.6).
CAUTION
Tip possibly protrudes. Remove it on the tray.
6
Fig. 5
Tip Remover
Hole
Fig. 6