Conceptronic CM3PVRD Manuel De L'utilisateur page 59

ENGLISH
When you select the 'Setup' [7] option in the Main Menu, or press the 'Setup' button (21) on the remote
control, the Setup Menu will be shown on your screen. The explanation below shows all available settings
with the including description.
System:
TV System Select the TV System which corresponds with your TV. You can select between PAL
and NTSC. (Default = PAL)
Screensaver Set the screensaver of the unit on or off. (Default = On)
Sys Language Select the system language for the unit. (Default = English)
Time Format Set the time format of your choice. (Default = D_M_Y_24)
Set Date Set the current date.
Set Time Set the current Time.
Reset Setting Reset the unit to the factory default settings.
(Only the configuration will be restored. The data on your Harddisk will not be
erased).
A/V Set:
Video Output Select the Video Output signal which corresponds with the used output ports on the
unit.
TV Type Set the 'TV Type' to the correct aspect ratio of your TV.
('4:3 PS' (Pan & Scan), '4:3 LB' (Letterbox) or '16:9' (Widescreen)).
TV Input Type Set the 'TV input type' to the correct tuner you want to use.
('Digital TV' or 'Analog TV').
12. System Configuration
59