Conceptronic CM3PVRD Manuel De L'utilisateur page 41

ENGLISH
Search and store Analog TV Channels:
•
Select the option 'Analog TV' in the Setup Menu.
•
Set the 'TV Signal' to 'Cable' if you have connected the unit to your cable signal. Otherwise, select
'Antenna' if you have connected the unit to an aerial antenna.
•
Select the option 'Auto Tuning' to search for TV channels.
•
In the 'Auto Tuning' Menu, select the correct 'TV System' and 'Audio Format' for your country.
The default setting is 'PAL-BG', which is used in most European countries, except France, which uses
'SECAM L'.
•
Select 'Go!' to start searching for channels.
During the channel search, all found channels will automatically be stored in the memory of the unit. This
can take some time.
When the channel search is complete, the unit will return to the Setup Menu.
Analog TV Tuner configuration
41