Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
The unit needs to be configured when you turn it on the first time.
•
Select the correct input channel on your TV where the unit is connected to. (Composite, SCART, S-Video
or Component).
Note:
From this point, the manual is based on the fact that your TV is set to the input channel of the
unit. All steps described are related to the operation of the unit.
•
Check if the main power switch on the back of the unit is set to 'I'.
•
Turn on the unit with the power button on the front of the unit, or with the 'Power' button (1) on the
remote control.
The unit will turn on and display the menu on your screen.
Note:
The unit needs to initialize the Harddisk when it is turned on. This can take a little while. During
initializing, the message "Please Wait..." is shown on your screen.
Note:
The default output signal is Composite. If you are using another output for the unit, it is possible
that your screen does not show the menu. Press the 'Output' button (20) on the remote control to
switch the output signal of the unit.
Note:
When using the unit for the first time, the internal Harddisk must be formatted. Select 'Yes' to
format the internal Harddisk. After the format is complete, the unit can be configured and used.
When formatting the internal Harddisk, all data on the Harddisk will be erased!
The following options are available in the Main Menu:
[1] – Movies
[2] – Music
[3] – Photos
[4] - AV Input
[5] - TV Tuner Input
[6] – Rec Schedule
[7] – Setup
7. First-Time Configuration
Playback of stored records and movies.
Playback of stored music.
Playback of stored photos.
View the Audio/Video Channel.
View Live TV.
Configure scheduled records.
Configure the unit.
39
Publicité
