Conceptronic CM3PVRD Manuel De L'utilisateur page 50

ENGLISH
Note: When recording to USB or Memory Card, make sure you have a High-speed device attached. (An
USB2.0 Device or High-Speed Memory Card)
•
Set the quality for the recording: 'HQ', 'SP' or 'LP'. Press the 'Enter' button (26) on the remote control
to continue.
Note: Recording in 'HQ', 'SP' or 'LP' influences the quality of your record and the amount of space
needed for the record.
For example, if you unit is equipped with a 500GB HDD, the record time will be:
HQ:
SP:
LP:
The recording is now programmed as a scheduled recording and the unit will start recording on the
programmed time and channel.
When the unit is programmed with scheduled recordings, you can put the unit into Standby.
The internal clock will turn on the unit 3 minutes before the scheduled recording starts and selects the
correct channel 1 minute before the recording starts.
Note: During recording, you cannot change the current channel.
The recording is stored with a name based upon the record date and time, with the following name:
"MMDDhhmm.AVI"
When the recording is completed, the unit will if standby must be activated. When there is no action
taken, the unit will automatically return to standby mode after 15 seconds.
228 hours and 35 minutes. (app. 2190MB for 1 hour)
437 hours and 46 minutes. (app. 1140MB for 1 hour)
656 hours and 45 minutes. (app. 760MB for 1 hour)
(MM = Month, DD = Day, hh = Hour, mm = Minutes)
50