Conceptronic CM3PVRD Manuel De L'utilisateur page 57

ENGLISH
The unit can be connected to your computer to copy data (movies, music, pictures, records, etc.) from and
to the internal HDD.
Note: In our example below, we are using a computer running Windows XP, but the unit can be used on
all computers with USB support and the capability of reading & writing FAT32 file systems.
Connect the unit to your computer
•
Connect the delivered USB to Mini-USB cable to the backside of the unit and to a free USB port on your
computer.
•
Turn the unit on with the main power switch on the backside of the unit. The unit will be recognized
and installed automatically and will be shown as an extra drive on your computer.
By default, the internal HDD of the unit will be initialized as an USB storage device.
Switch between HDD Mode and Cardreader Mode
You can use the Cardreader of the unit as a Cardreader on your computer. When you enable the Cardreader
mode, the HDD is not accessible on your computer.
•
Press and hold the 'Arrow Down' button on the front of the unit for 2 seconds while it is connected to
the computer.
The HDD will disappear from the 'My Computer' window, and a removable drive will be shown. The
Cardreader is now active.
•
To switch back to the HDD Mode, press and hold the 'Arrow Down' button on the front of the unit for 2
seconds.
11. Computer Connectivity
57