Publicité
Les langues disponibles
Les langues disponibles
USING THE STAND MIXER
GETTING STARTED WITH YOUR NEW BOWL-LIFT STAND MIXER
FOR DETAILED INFORMATION ON USING THE STAND MIXER
Visit KitchenAid.com for additional Instructions with videos, inspiring recipes, and tips
on how to use your Stand Mixer.
For best performance, please go through these quick steps before using your Stand Mixer.
Make sure Stand Mixer is turned to
1
the OFF position and is unplugged.
Attach Flat Beater. Slip Flat Beater
3
onto the Shaft. Turn left, hooking
beater over the Pin.
6 | USING THE STAND MIXER
Pin
Locating Pin
Attach the Bowl to the Stand Mixer.
Fit Bowl Supports over Locating
2
Pins and press down on back of the
bowl until Bowl Pin snaps into Spring
Latch.
IMPORTANT: If bowl is not securely
snapped into place, it will be unstable
and wobble during use.
Raise Bowl to mixing position.
Rotate Bowl Lift Lever counter-
4
clockwise to the straight up position.
The bowl must always be in the
raised position when mixing.
Spring Latch
Publicité
