Publicité
Les langues disponibles
Les langues disponibles
USING THE STAND MIXER
Test Beater to Bowl Clearance.
Check the proximity of the Flat
Beater to the bowl. The beater
should just clear the bottom of the
bowl but should not touch it. Plug
Stand Mixer into a grounded 3
5
prong outlet. Turn Stand Mixer ON
and test each speed making sure
the beater does not touch the bowl
during operation. If the beater is
too far away from the bottom, or is
hitting the bowl, proceed to step 6
to make the necessary adjustments.
IMPORTANT: The Stand Mixer may
become warm during use. Under heavy
loads with extended mixing time periods,
you may not be able to comfortably
touch the top of the Stand Mixer. This is
normal. The Stand Mixer motor may emit
a pungent odor during initial operation.
This is common with electric motors.
Raise Bowl
Adjusting your Beater to Bowl
Clearance. Unplug Stand Mixer.
Lower the bowl to the down
position. Adjust the Beater Height
Adjustment Screw to lower or raise
6
the bowl. Repeat Steps 2-5
with the Wire Whip and Spiral
Dough Hook. Your Stand Mixer is
now set up and ready for use. Ce
mélangeur sur socle est désormais
installé et prêt à être utilisé.
USING THE STAND MIXER | 7
Lower Bowl
Publicité
