FUAVE SV9010 Mode D'emploi page 13

Remote control
1. On/Off button
2. Speed button (+)
3. On timer button
4. Swing button
5. Night mode button
6. Speed button (-)
7. Off time button
8. Mode button
BEFORE THE FIRST USE
• Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Place the device on a flat stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the voltage which
is indicated on the device matches the local voltage before connecting
the device. Voltage 220V-240V 50Hz).
ASSEMBLY
Installing the base
1. Remove the nut from the stand, and insert the stand into the base.
2. Tighten the nut from the bottom of base to secure the stand to the base.
3. Tighten the nut securely, not to be loosened.
Installing the rear guard
4. Remove the guard stopper nut ,cap and Blade nut. Fix the rear guard to
the motor.
5. Tighten the guard stopper nut securely.
Installing the blade
6. Insert the blade into the motor shaft closely.
7. Tighten the blade with blade nut.
1 0
77.772820.01.001_77.772821.01.001_IM.indd 10 77.772820.01.001_77.772821.01.001_IM.indd 10
Control panel
1. (Night) mode lamp
2. (Swing) lamp
3. (On/off timer) lamp
4. Led display window
5. On/off & speed adjustment button
6. (Mode) lamp
7. (Normal mode) lamp
8. (Nature mode) lamp
9. (Sleep mode) lamp
10. (Temp sensor) lamp
17-11-2020 12:43:18 17-11-2020 12:43:18