Sewing A Button - Singer 2273 Manuel D'instruction

2 3
START SEWING

Sewing a Button

This machine includes a Button Sewing Foot, allowing you to attach buttons to your projects easily
and quickly.
HOW TO:
1. Set the machine to Straight Stitch by turning the Stitch Selector Dial to the Straight Stitch Symbol.
(See Page 19)
2. Set the Stitch Width Dial control to 5 to begin. (See Page 19)
3. Set the Stitch Length Dial to 0 to begin. (See Page 19)
SEW ALONG: Attaching a Button
B C D E F G H
B C D E F G H
K

 Remove the Darning Plate when finished.
24
!
Stitch Selector Dial
1. Attach the Darning Plate to the needle plate directly below the presser
I J K
1
foot. To do this line up the prongs on the underside of the Darning
Plate with the holes in the needle plate. Push down to snap it in place.
I J K
2. Remove the All Purpose Foot and attach the Button Sewing Foot.
(See Page 26).
3. Set the Stitch Length Dial control so that 0 is directly below the green
arrow.
4. Set the Stitch Width Dial control so that number 0 is directly in front of
the green arrow.
5. Set the Stitch Selector Dial so that the Straight Stitch setting is directly
below the green arrow.
6. Place the button on the fabric, then line up the button directly under
the front of the Button Foot so the 2 holes of the button appear in front
of the foot. Turn the hand wheel towards you to make sure the needle
clears the hole on the left. Step on the foot control and sew 3 to 4
securing stitches. Raise the needle out of the fabric.
7. Set the Stitch Selector Dial so that the Zig Zag setting is directly below
the green arrow.
1
8. Set the Stitch Width Dial control so that number 5 is directly in front
of the green arrow. Turn the hand wheel toward you to make sure that
the needle clears both the left and right holes of the button. Adjust the
Stitch Width Dial if necessary. Sew 10 to 12 stitches. Raise needle out
of the fabric.
9. Set the Stitch Selector Dial so that the Straight Stitch setting is directly
below the green arrow.
10. Set the Stitch Width Dial control so that number 0 is directly in front of
the green arrow. Sew 3 to 4 stitches to secure the stitching.
Stitch Width Dial
1
1
Stitch Length Dial
1
1