Sewing A Stretch Stitch - Singer 2273 Manuel D'instruction

2 3
A stretch stitch is used for knit fabrics. This type of seam will stretch with the fabric.
(Go to www.singerco.com to view other stretch stitches that can be used).
HOW TO:
1. Set the machine to the desired stitch by setting the Stitch Selector Dial to one of the stretch stitch
settings. (See Page 19)
2. Set the Stitch Width Dial control between 2 and 5 depending on how wide you want your stitch to
be. (See Page 19)
3. Set the Stitch Length Dial to the Stretch S1 setting. (See Page 19)
C D E F G H I
B C D E F G H
SEW ALONG: Overedge Stitch
A B
S
1


To obtain a Straight Stretch Stitch, simply move the Stitch Width Dial control to the control to 0.
!
22
START SEWING

Sewing a Stretch Stitch

Stitch Selector Dial
J K
I J K
C D E F G H I
A B C D
S
1
Stitch Width Dial
1. Set the Stitch Selector Dial, so that the Overedge stitch setting
is directly below the green arrow.
2. Set the Stitch Width Dial control so that number 5 is directly in
front of the green arrow.
3. Set the Stitch Length Dial control so that the S1 selection is
directly below the green arrow.
4. Place the fabric under the All Purpose Foot with the right-hand
edge of the fabric lined up with the desired seam guide line on
the right side of the needle plate. Lower the presser foot, then
J K
step on the foot control to begin sewing.
E F G H I J K
Stitch Length Dial
1
1
1