3
INHALATION
3.1 Preparing for inhalation
The controller can be operated with the accompanying power adapter or with batteries
(or rechargeable batteries). It is recommended to insert the batteries before assem-
bling the nebuliser. On the other hand, the power adapter should not be connected
until just before starting the inhalation session.
Inserting and replacing batteries
• Open the battery compartment cover on the
controller.
• If necessary, remove used batteries.
To do this, pull the two release strips.
• Insert new batteries.
Make sure that the batteries are aligned to
match the polarity symbols on the controller
battery compartment.
– 40 –