Information About Electromagnetic Compatibility; Ambient Conditions - Pari VELOX Notice D'utilisation

6.5 Information about electromagnetic compatibility

Electrical medical equipment is subject to special precautionary measures with regard
to electromagnetic compatibility (EMC). Such equipment must only be installed and
operated in accordance with EMC instructions.
Portable and mobile high-frequency communication devices can disrupt electrical
medical equipment. Using accessories, converters and power cords other than those
specified (with the exception of converters and power cords that the manufacturer of
the medical electrical device sells as spare parts for internal components) can result
in higher emission levels or lower the resistance to interference of the device.
The device must not be placed directly beside or on top of other devices for operation.
If the medical electrical device must be placed beside or on top of other devices to op-
erate it, it should be monitored constantly to ensure that it is operating properly in the
arrangement used.
Technical data on electromagnetic compatibility (EMC information) is available in
table format upon request from PARI GmbH or on the internet at the following linked
page:
https://www.pari.com/fileadmin/Electromagnetic-compatibility-2.pdf

6.6 Ambient conditions

Operation
Ambient temperature
Relative humidity
Atmospheric pressure
Use of the device in professional healthcare facilities is limited to the inpatient wards
and the intensive care unit. Use of the device in areas with elevated magnetic or elec-
trical radiation (e.g., close to an MRI scanner) is not permitted.
The device is intended for use in the domestic environment and in public healthcare
institutions. It must only be operated in the passenger areas of aeroplanes and trains.
The device must only be operated with batteries in motor vehicles.
Transportation and storage
Minimum ambient temperature (without monitoring of
relative humidity)
Maximum ambient temperature (with relative humidity of up
to 93%, non-condensing)
Humidity
Atmospheric pressure
– 57 –
5 °C to +40 °C
15% to 93% (non-condensing)
700 hPa to 1,060 hPa
-25 °C
+70 °C
max. 93%
500 hPa – 1,060 hPa
en