Dispensing Hot Water; Dispensing With Autosteamer - Wega URBAN EVDP Manuel D'utilisation Et D'entretien

Dispensing hot water

6.8
• Place the pot under the hot water
spout;
• press the water button
wait for the hot water to be dis-
pensed;
• to stop co ee dispensing ahead
of time, press the dispensing key
again .
Avoid contact with the hot water nozzle, do not place your hands
or other body parts near the hot water nozzle tips.
The machine is already programmed by the Manufacturer. If you
wish to modify co ee doses, proceed as indicated in par. 7.2.3 on
page 63 .
58 272
of
and

Dispensing with Autosteamer

6.9
• Immerse the autosteamer wand
nozzle tips into the milk;
• press the desired button on the dis-
play, for example
steam to be dispensed;
• wait until the dispensing process has
completed;
• to stop dispensing ahead of time,
press the same key
Short steam wand dose
Big steam wand dose
Before using steam to heat and froth milk, perform one steam
dispensing cycle on empty by pressing one of the selection buttons
to let out some short spurts of air, until all the condensation water
has been released. To stop dispensing, press the same button
again.
Always keep the nozzle tips clean using a cloth dampened in
lukewarm water. Milk can be kept in the fridge for a maximum
of 3-4 days.
Leave the steam wand immersed in milk only for the time needed
to heat milk.
To change the autosteamer's temperature or adjust milk forthing,
contact a Quali ed Technician.
and wait for the
again.
USER Manual
START START START
STOP STOP STOP