Hoshizaki ACK-40-A Notice D'utilisation page 11

ENGLISH
Barrier - Spring (No. 5)
6) Part No.6 [KM-40/60/80C(-HC)]
7) Part No. 7
Thumbscrew (2 points)
[KM-40/60/80C(-HC)]
Screw (3 points)
Step 10 [KM-130C, KM-140C-HC]
Use the three T2 truss head tapping screws (No. 2) to
fix the barrier - spring (No. 5) in its correct position as
shown.
Step 11
Tighten the spacer (No. 6) into the original louver fixing
screw hole (2 points on left and right).
Thumbscrew (1 point)
[KM-130C, KM-140C-HC]
8
Step 12
After refitting the removed louver,
fix it with the thumbscrew(s) (No.
7).
* Dispose of the original louver
fixing screw(s).