[B] Installation - Hoshizaki ACK-40-A Notice D'utilisation

ENGLISH

[b] Installation

1) Part No. 4
Cut the hose at 40 mm from
the bottom and again at
20 mm. The 175 mm long
silicone hose is divided into
three parts. Dispose of the
unnecessary 20 mm hose.
4
Step 1
Attach the tube pump bracket.
Use the two T2 truss head tapping screws (No. 2) to fix the
tube pump bracket to the icemaking bracket.
Tube Pump Bracket
Step 2
Attach the tube with tee.
Remove the hose clamp at the bottom and pull the silicone
hose off the pipe.
Clamp
Attach the silicone hoses by 10 mm or more to
both ends of the tee. Use the two clamps (No. 11)
to secure the hoses. Reconnect the hoses to the
original position.
Tee