LaserLiner ThermoSensor Air Mode D'emploi page 5

ThermoSensor Air / Tip / Touch
Completely read through the operating instructions, the
"Warranty and Additional Information" booklet as well as
!
the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
This document must be kept in a safe place and passed
on together with the device.
Function / application
The ThermoSensor Air, Tip and Touch K-type temperature sensors are
compatible with the following devices: ThermoMaster, ThermoMaster
Plus, ThermoSpot XP, CondenseSpot XP, MultiMeter XP and
ClampMeter XP. Each of the temperature sensors has a heat
resistant handle and is designed for a specific application.
– ThermoSensor Air measures air and gas temperatures.
– ThermoSensor Tip is suitable for inserting into soft, highly viscous
materials for measuring the contact temperature.
– ThermoSensor Touch allows the surface and contact temperature
to be measured on solid surfaces.
General safety instructions
– To ensure correct use, please observe the safety instructions
for your temperature measuring device or multimeter.
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– Not suitable for use in environments that present a risk
of explosion or for medical diagnoses.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– Do not power the temperature sensor (K-type) with
an external voltage.
05
EN