Eureka MIGNON TURBO Manuel D'instructions page 30

5.2.2 DOSE DISPENSING AND ADJUSTMENT (DISPLAY)
• By pressing the button of one dose(14)
be dispensed is selected (the buttons goes on).
• With a single pressure (quick) of the grinding start button (6),the coffee dispensing
and the countdown to zero are activated.
• When the dispensing is complete, the grinding time goes back to the value set. The
counter of single or double doses is increased by 1.
• Select the single (14)
and (13) to increase or reduce the dispensing time of the selected dose (the
time is shown in seconds on the display).
• If the button (12)
increased or reduced according to the pressure time.
To pause the automatic dispensing before the grinding time has elapsed, press
the grinding start button (6) with the filter holder:
• Press the button (6) again to restart the dispensing for the remaining time.
• Keep pressed the button of the selected dose (blinking) to stop dispensing.
The grinding time goes back to the value set.
5.2.3 CONTINUOUS DISPENSING
Press the single dose (14)
access this mode.
The symbol (11)
The continuous dispensing lasts up to max 60 seconds.
To exit the continuous dispensing mode, keep pressed the single dose (14)
double dose(15)
5.2.4 LOCKING THE TIME
Press the buttons(12)
dose dispensing time adjustment stops. Furthermore, on the display the buttons (12)
and (13 )
Press both buttons (12)
30
or double dose (15)
or (13) , is kept pressed for some seconds, the time is
and double dose (15)
appears on the display.
button for some seconds.
and (13)
disappears.
and (13)
or double dose (15)
and press the buttons (12)
. buttons at the same time to
. at the same time. When releasing them, the
again to unlock the functions.
EN
, the dose to
or the