Publicité
Les langues disponibles
Les langues disponibles
Failure codes
Code
Failure
E01
Overheating of the
electronics
E02
Buttons do not respond,
the pan on the glass plate
is overheating
E03
Mains voltage too high or
too low.
In all other cases please contact your supplier. In case of any doubt, always contact your
! Use only pans that are suitable for induction and have not been used before on other sources of
heat.
!! Pans with a sandwich bottom that have been used on gas, can warp and are not suitable anymore
for electric, ceramic, halogen or induction cooking.
Warranty
Any defect affecting the functionality of the appliance that becomes apparent within one year after
purchase will be corrected by free repair or replacement provided the appliance has been used and
maintained in accordance with the instructions and has not been abused or misused in any way. Your
statutory rights are not affected. If the appliance is claimed under warranty, state where and when it
was bought and include proof of purchase (f.e. receipt).
In line with our policy of continuous product development we reserve the right to change the product,
packaging and documentation specifications without notice.
Discarding & Environment
At the end of the life of the appliance, please dispose of the appliance according to the regulations
and guidelines applicable at the time.
Throw packing materials like plastic and boxes in the appropriate containers.
Possible cause
Insufficient ventilation
Empty or overheated pan or
pan with too hot oil
Fault in the mains
supplier!
Possible solution
Check ventilation slots on dust
and make sure there is enough
space around the appliance.
Switch the appliance off, let it
cool off and switch it on again
Remove the plug from the wall-
mounted electrical socket, let it
cool off and plug it back in
Electrical installation is not in
order, have an electrician check
it
Publicité
