Battery Test; Usb Port - XciteRC 52000025 Mode D'emploi

0:15
EN

CHARGE
REFRESH
Charging time

Battery test

• Press the MODE button for 1 second to change the mode for all battery compartments. To change the
mode on a single battery compartment, press key 1... 4 first.
• Each press of the button changes the mode from charge to test (= charge and discharge in order to
determine the capacity).
• By (repeatedly) pressing CURRENT the charge or discharge current is increased gradually between 200
mA and 1 A.
• The test will start automatically after a few seconds, the display will show CHARGE TEST. The battery
will be fully charged first, then discharged - the display shows DISCHARGE TEST. Now the discharge
current may optionally be adjusted by using the CURRENT key.
• When the test cycle is done, the battery capacity is displayed in mAh.
0:15

CHARGE
TEST
Charging time

USB port

At the rear USB port, you can charge for example your phone or digital camera with a charging current of 1 A.
16
1000
h  mA
CHARGE
REFRESH
Current
1000
h  mA
CHARGE
TEST
Current
1.23
V


CHARGE
REFRESH
Voltage
1.23
V
 
CHARGE
TEST
Voltage
Battery test · USB port
1920
Ah 
CHARGE
REFRESH
Capacity
1920
Ah 
CHARGE
TEST
Capacity
Charger 52000025