IMPORTANT!
Always turn off and disconnect the unit from the supply mains before changing filters, cleaning or
carrying out maintenance
Changing the filters
Step 1
Remove the lid.
(see "Care and Mainte-
nance step 1).
Step 3
Remove both side
filters. (see "Care and
Maintenance steps 2
and 3).
Step 5
Insert the third replace-
ment Blueair filter into
the top of the unit. En-
sure the words
/
out
up
face upwards
procedures..
Step 2
Remove the top filter.
Step 4
Insert both replacement
Blueair filters into the
side slots. Ensure the
words
wards.
Step 6
Snap the lid back into
place and plug into the
mains.
The unit is now ready
for use.
/
face out-
out
up
Status orange - replace filter and
reset by pressing down for 5 seconds.
11