Map Screen Features - Clarion NAX963HD Mode D'emploi

NAX963HD_280QY5000EA-00_EN.book Page 15 Thursday, May 11, 2006 8:05 PM

Map Screen Features

Indicators on the map
Indicators displayed on the Map screen are different according to the conditions at that time. This section
explains the main indicators displayed on the Map screen.
Indicators on the map of the current location
1
1 [AV] key
Displays the Audio screen.
2 Current street name
Shows the name of the current street.
3 Vehicle mark
Indicates the current location and direction of
your vehicle. You can change this mark. ➜
"Vehicle Icon" (P. 49)
4 Map bearing mark/GPS receiving
status
Indicates the map orientation. You can change
the map orientation. ➜ "Changing the map
appearance" (P. 20)
In addition, the receiving status of the GPS signal
is indicated by the colour of the four corner
frames enclosing the bearing mark.
Blue
:Receiving in 3D
Yellow
:Receiving in 2D
Red
:No signal received
9
2 3 4 5
5 Clock
Displays the current time.
6 [NAVI] key
Displays the navigation shortcut menu.
7 [Zoom] key
Touch this for zooming in/out the map. ➜
"Zooming IN/OUT the map" (P. 20)
8 Map scale
Indicates the scale of the map currently
displayed.
9 [TMC] key
The [TMC] key turns to green and the time that
data was received in last is indicated in the upper
area while receiving TMC information. Touching
the [TMC] key displays the RDS-TMC menu
screen. ➜ "TMC Traffic Information Settings"
(P. 47)
8
7
6
15
NAX963HD