Publicité
EN
13.3
CLEANING THE GRINDING SYSTEM
After removing the lid, open the upper grinder holder. Then clean the grinders and other
internal parts with a brush or a dry cloth. If necessary, use a vacuum cleaner or a jet
of compressed air. After putting back the upper grinder holder and the lid, insert the
hopper. For complete sanitation, use commercially available detergent tablets for coffee
grinders.
ATTENTION
All cleaning and sanitising operations must be carried out with products
approved for use with food.
13.4
MAINTENANCE
Check, and if necessary replace, the grinders every 300 kg of coffee. To carry out
maintenance on the grinders, disconnect the appliance from the power supply and
remove the bean container. Remove the rear shield and unscrew the screw hidden
behind to remove the lid. Next, unscrew the underlying screws that secure the upper
grinder holder. To clean the grinders, use a brush or a dry cloth; if necessary use a
vacuum cleaner or a jet of compressed air.
ATTENTION
Maintenance must only be carried out by specialized personnel authorized by the
manufacturer.
ATTENTION
Do not carry out makeshift or precarious repairs, much less use non-original
spare parts.
14
TROUBLESHOOTING
Contact the specialized personnel.
29
Publicité
