Using The Index Function - Sony SVO-1320P Mode D'emploi

Using the index
function
Note
• No index signal will be
added when recording
starts from recording
pause.
The VCR automatically marks an index signal at the point where
recording starts. Use this as a reference to find the beginning of the
recording. The VCR can search up to 19 index signals ahead or behind of
the current position.
Watching the beginning of each recording
consecutively — Index scan
You can watch the beginning of each recording consecutively by
detecting the index signal one by one.
1
Insert an indexed tape into the VCR.
DUAL MODE
2
SHUTTLE ring
Press INDEX once.
The AUTO indicator appears in the display window.
3
Turn the DUAL MODE SHUTTLE ring on the VCR
clockwise to ) or counterclockwise to 0, or press FF
) or REW 0 on the remote commander.
• To watch succeeding programmes, turn the ring to ) or press
• To watch preceding programmes, turn the ring to 0 or press
The VCR locates the next or previous index signal, and plays the
tape for approximately 10 seconds, and then moves to the next
index signal. The index number in the display window increases
one by one.
INDEX
Locating an index — Index search
FF )
You can locate an index by indicating how many index signals ahead or
behind that index signal is from the tape's current position.
REW 0
1
Insert an indexed tape into the VCR.
2
Press INDEX repeatedly until the index number you
want to find appears in the display window.
The AUTO indicator and the index number appear in the display
window.
3
Turn the DUAL MODE SHUTTLE ring on the VCR
clockwise to ) or counterclockwise to 0, or press FF
) or REW 0 on the remote commander.
• To locate succeeding programs, turn the ring to ) or press FF
• To locate preceding programs, turn the ring to 0 or press
The VCR starts searching and the index number in the display
window counts down to zero. Playback starts automatically from
that point.
FF ).
REW 0.
).
REW 0.
Additional Operations
19 -EN