Braun Aesculap Acculan 4 Mode D'emploi/Description Technique page 3

►
Inspect the new product after removing its transport packaging and
prior to first use to ensure it is in good working order; charge with char-
ger GA320 and verify functionality.
►
To prevent damage caused by improper setup or operation, and to not
compromise the manufacturer warranty and liability:
– Use the product according to these instructions for use.
– Follow the safety and maintenance instructions.
– Only combine Aesculap products with each other.
– Follow the application advisories acc. to standard, see Extracts from
relevant standards.
►
Ensure that the product and its accessories are operated and used only
by persons with the requisite training, knowledge, or experience.
►
Keep the instructions for use accessible for the user.
►
Always adhere to applicable standards.
►
Do not use the product if it is damaged or defective.
►
Set aside the product if it is damaged.
►
Store product at room temperature (Maximum recommended duration
of storage is 365 days; keep out of direct sunlight).
►
Keep product dry.
►
Observe the instructions for use for the corresponding Acculan
machines.
4. Product description
4.1 Scope of Supply
Art. no. Designation
GA346 Acculan 4 Li-Ion battery short
TA014537 instructions for use Acculan 4 Li-Ion battery short
4.2 Components required to operate the device
■
Acculan 4 charger GA320
■
Acculan 4 or Acculan 3Ti machine:
– GA340
– GA341
– GA344
– GT666
– GA670
– GA671
– GT668
– GA675
4.3 Operating principle
The Acculan 4 Li-Ion battery supplies the Acculan machines with short
handle with voltage. The battery is charged in the Acculan 4 charger
GA320. The charging process of a completely discharged battery can take
up to 120 min.
The speed and rotational direction are set depending on the trigger setting
of the machines:
■
for saws and Dermatome: speed clockwise
■
for drills: speed clockwise, counter-clockwise, oscillation and pilgrim
step
5. Preparation
►
Prior to use, inspect the product and its accessories for any visible dam-
age.
►
Use the products and their accessories only if they are in perfect tech-
nical condition.
6. Working with the device
6.1 System set-up
►
See instructions for use for the respective Acculan machine and the
Acculan 4 charger GA320.
6.2 Functional test
See the instructions for use for the respective Acculan machine.
6.3 Safe operation
Risk of injury and material damage due to inappro-
priate use of batteries!
►
WARNING Charge battery only in the Acculan 4 charger
GA320.
►
Insert battery correctly (Acculan machine and
charger).
Risk of injury and material damage due to damaged
batteries!
►
Check batteries for any damage before charging.
WARNING
►
Do not use or recharge damaged batteries.
►
For proper loading and removal of the battery from the Acculan
machine, see the instructions for use for the respective Acculan
machine.
en
3