Operating & Changing The Vaping Modes; Switching Between Operating Modes - InnoCigs EVIC PRIMO 2.0 Manuel D'utilisation

INNOCIGS EVIC PRIMO 2.0 – OPERATING & CHANGING THE VAPING MODES

Switching between Operating Modes

Press the Fire button three times quickly to enter the menu and see your current vaping mode. Press the "Up"
button to switch between VW, VT-Ni, VT-Ti, VT-SS, TCR (M1, M2, M3) modes. Press the "Down" key while the
symbol is flashing in temperature mode to enter the submenu (VT-Ti, VT-Ni, VT-SS / M1, M2, M3). Press the fire
button to confirm your current selection.
Adjustment of Wattage in VW Mode
Depending on the atomizer head used, the power output can range
between 1 and 228 watts in VW Mode.
In TEMP/TCR mode, press the Fire button 3 times and the "Down" but-
ton to enter the corresponding sub-menu. While the display is flashing,
you can select the desired wattage with the setting buttons.
68