Error Messages & Protections; Display On/Off; Short-Circuit Protection - InnoCigs EVIC PRIMO 2.0 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INNOCIGS EVIC PRIMO 2.0 – ERROR MESSAGES & PROTECTIONS

Display On/Off

Press and hold the Fire and "Down" buttons while the power is on to switch between stealth-on and stealth-off
modes. In stealth-on mode, you can vape while the OLED screen is off.
Preheat Function
Hold down the Fire button and the "Up" button simultaneously to enter the submenu. Press the "Up" button
twice to enter the preheat setting. Press the "Down" key and then press the Fire button to switch between the
power and the duration. Use the "+" button to make the corresponding setting. Press the Fire button to confirm.
Over 10 Sec Protection
If you press and hold down the Fire button for more than 10 seconds, the device will automatically switch off. The
display will show "OVER 10S PROTECTION."

Short-Circuit Protection

The message "ATOMIZER SHORT" will appear on the display immediately if there is a short circuit at the head.
71

Publicité

Table des Matières
loading

Table des Matières